Author Topic: car is ready  (Read 22388 times)

0 Members and 1 Guest are viewing this topic.

Offline Pawel Sokolowski

  • Administrator
  • 2000 cc
  • *****
  • Posts: 207
    • Abarth Meeting in Poland 2012
car is ready
« on: November 24, 2003, 11:09:14 am »
Car is ready and thats the engine photos from owner








Abarth & Friends meeting, 18-19.05.2013 | http://2013.abarth-gmr.be

rkh

  • Guest
Autobianchi Tuning
« Reply #1 on: November 30, 2003, 11:32:33 pm »
I'm indeed very impressed!

And I really hope you'll keep us informed of the progress on this car, and give us some information about the performance!

Black_Panther

  • Guest
car is ready
« Reply #2 on: December 02, 2003, 10:50:52 am »
beautifull car. j have driven such one but it's condition was rather bad tjan good. now it is hidden i the garage and waits for some cach flow in owners hand. we have made some good races in this car. i was realy surprised how fast can it accelerate.

the job you have done on jor car is worth of congratulation. can you write some detail of the engine on pramateres??

greetengs :)

guy moerenhout

  • Guest
a112 groep2
« Reply #3 on: December 02, 2003, 11:56:32 pm »
Ok,special cilinderhead ,valves,springs ,spring holders,camshaft  2x36 webers,exhaust header,5speed,4disque brakes,rolcage, race seats ,body welding,wingextentions ,cromodora 5x13, etc;;;;

Offline Luke

  • 1800 cc
  • ******
  • Posts: 32
    • Fiatistas - Portugal
Cilinderhead
« Reply #4 on: March 01, 2004, 11:00:29 am »
Hi!

i'm working on a abarth engine for my 127 Surf (a portuguese mk2 model)
what changes did you do to the cilinderhead?
is it a one off item or do you manufacture?

i have an abarth kit (valve cover/intake for a DMTR) but i would like to use 2 twin carburettors instead

i'm also searching for abarth valve springs (rated 12.000rpm) do you know where i can find them?
There is no place like 127.0.0.1 :)

www.fiatistas.com [nofollow]
www.fiatistas.com/forum [nofollow]

Offline guy moerenhout

  • Administrator
  • 3000 cc
  • *****
  • Posts: 4.500
    • www.abarth-gmr.be
A112
« Reply #5 on: July 21, 2004, 10:46:06 pm »
12000 is it not to high ? stay 1 carbur. 36/36 and this gos good with good cam  and high comprestion
______abarth  gmr-team ______
___http://www.abarth-gmr.be ___

Offline Luke

  • 1800 cc
  • ******
  • Posts: 32
    • Fiatistas - Portugal
my 127 specs
« Reply #6 on: July 22, 2004, 10:25:38 am »
i have a brand new a112 abarth(70hp) cam for my engine, the carbs i have at home are DMTR 32/34 if i'm not mistakended the pistons are stock, i'm trying to find the belt for the belt distribution kit but i cant seem to get my hands on one, do you recon i should upgrade the valve springs? or will the stock ones work for me, the cilinder head is polished and ported and it has big valves, what kind of performance can be expected from such a preparation? the bottom end of the engine is fully lightened, polished and balanced
There is no place like 127.0.0.1 :)

www.fiatistas.com [nofollow]
www.fiatistas.com/forum [nofollow]

Scuderia Topolino

  • Guest
Upgrading A112 motor.
« Reply #7 on: November 06, 2004, 04:04:49 pm »
With regard to the A112 motor, there is one item that I would definitely replace, the connecting rod bolts.  In 2004 I witnessed at least 5 wngine failures directly caused by standard bolt failures.

As far as upgrades to the A112 motor, it all depends what you plan to do with it.  The standard valve springs (presuming that they have not run a couple of hundred thousand miles are quite OK for 7500 RPM.  Above that you need better.  Rather than talk about types or color coded springs, let look at specifications.  Valve closed seat pressure should be 70 PSI, valve fully open 260 PSI.

If the application is for the street, then the standard A112 70HP camshaft is quite good.  I hear people using 230 degree camshafts.  Well if you are doing all out racing, have a very close ratio gearbox and are willing to keep the RPMs between 7000 and 10,000 RPM, then this cam might work well.  Don't go for too much duration or it will hurt driveability.  If you do want to change to a BIGGER cam, I would recommend something that has a little bit more duration, and more lift.  By going with more lift and then some more duration the total valve opening period will be increased markedly.

For more information on engine building please visit my website at newbielink:http://www.scuderiatopolino.com [nonactive]

Offline Paul vander Heyden

  • 2000 cc
  • *******
  • Posts: 179
    • Scuderia Topolino
Re: car is ready
« Reply #8 on: December 13, 2009, 02:33:16 pm »
I noticed a misprint in my earlier comment.  The cam reference should have been 320 degrees, not 230  degrees.

Regards,
Paul

Offline Henrik Vind

  • 695 cc
  • ***
  • Posts: 4
Re: car is ready
« Reply #9 on: May 19, 2010, 08:57:23 am »
Hello from Denmark.

I know it's an old post, but I hope you still can help.

I have about the same setup

40 mm DCNF
32 valves in
29 valves out
4-1 manifold
302 degree camshaft with 7,2 hub

Im having BIG problems with the engine.
IIt's running to fat on low Rpm and VERY lean on high Rpm.

I have tryed emulsiontubes F22, F24, F25, F30, F33 and F36 but the diffrence is so big that it have to be fixed mekanicly. I'ts to big to change only by the tubes.

Witch tubes and jets have you used in your setup?

(I allsow have a set of 36 mm DCNF if needed)

Thank you.

Here is som pictures.













« Last Edit: May 19, 2010, 08:59:02 am by Henrik Vind »

Offline guy moerenhout

  • Administrator
  • 3000 cc
  • *****
  • Posts: 4.500
    • www.abarth-gmr.be
Re: car is ready
« Reply #10 on: May 19, 2010, 09:18:49 am »
I have use the 36 model
______abarth  gmr-team ______
___http://www.abarth-gmr.be ___

Offline Henrik Vind

  • 695 cc
  • ***
  • Posts: 4
Re: car is ready
« Reply #11 on: May 19, 2010, 10:25:05 am »
Yesterday I mounted the 36 mm - same problem!

That's why I'm running out of ideers....

Offline grant gauld

  • 2000 cc
  • *******
  • Posts: 146
Re: car is ready
« Reply #12 on: May 21, 2010, 01:20:31 am »
Henrik,
          It is all in the set up of your carbs.I think you need smaller chokes/venturis (both 36 or 40 mm carbs are fine).If the cam is dialed in correctly a professional dyno can get that set up running very well.
 Grant

 

Digital2