abarth squadra storica forum
www.abarth-gmr.be (website & forum-info) => welcome @ the abarth-gmr-forum => Topic started by: fortee9er on August 11, 2016, 07:51:45 am
-
Hello from Houston. I recently acquired a 1967 850 Spyder project and a truck (pick-up truck) load of 850 Spyder parts. The engine has been taken apart and needs to be rebuilt. This is a USA market car so I suspect the engine is the 817 cc not the 848 cc . I want to know what can I do to increase displacement and power without going crazy.
Thank You
-
I have no answer to your question but
You could also ask your question here also:
http://xwebforums.org/forumdisplay.php?f=48
there are a couple of exeriences people there and most of them are US based.
-
Hello Houston! 1967 should be a 843cc(100gs000 engine)does it have the covered headlights? ( very coveted ) Preformance wise a 903cc or 1040 engine will bolt in with very little modifications. They respond well to increased compression,bigger valves,cam, carburation , exhaust etc. Fun to drive! They runs on revs. HTH, Chuck