Author Topic: For sale DIFF HEAD CRANK FIAT ABARTH 131 RALLY  (Read 3711 times)

0 Members and 1 Guest are viewing this topic.

Offline trevor

  • 1800 cc
  • ******
  • Posts: 96
For sale DIFF HEAD CRANK FIAT ABARTH 131 RALLY
« on: December 26, 2014, 08:18:46 PM »
Differential, cylinder head, pistons and crank for  FIAT ABARTH 131 RALLY
Photographs below dated December 2014
For sale in 3 groupings    differential group;  cylinder head group;   crankshaft group
All offers for any group    or all groups    considered
Offers by PM   

ABARTH DIFFERENTIAL AND HOUSING COMPLETE   (for independent rear end)
•   Purchased new in 2007      total usage   less than 500 km   
•   original 10 / 39 Abarth ring and pinion (R+P) was removed and never used;
•   this unused new 10 /39 ring and pinion is included in sale as a spare 
•   differential currently has a 10/49  ring and pinion professionally installed
•   this differential has a fixed“spool” centre installed   
•   three additional spare centres are included  a) cone type LSD;  b) spool rigid centre    c) standard centre
   
•   all offers for differential group considered


16 valve Abarth131 cylinder head, camshafts; pulleys; valves, springs, etc
•   16 valve Abarth 131 cylinder head  in superb condition complete with valves, springs, buckets, caps, camshafts, pulleys
•   unused since 1987
•   refurbished in 2010  and not used since then.
•   NO corrosion, hardness tested and as new   
•   new guides, new valves seats reprofiled
•   Abarth camshafts profile 201  duration 250 degree at 50 thou clearance   lift 11mm   new camshaft seals   camshaft technical detail on data sheet in camshaft photo below   
•   all new valves standard Abarth size(14 old valves included);  new valve springs; new retainers, new caps (chrome moly 41/30)
•   used auxiliary shaft in excellent condition; water outlet
•   new head bolts (10)
•   new adjustable Guy Croft supplied cam pulleys   
•   new unused Alquati inlet manifold for IDF’s   
•   14 old valves

•   all offers for cylinder head group considered


Pistons  conrods  and crankshaft
 
•   86mm diam. standard Fiat Abarth 131 pistons with conrods
•   pistons are flat top and pistons/rods suit both 2000cc and 1800cc cranks
•   500 km total usage
•   90mm stroke (2 litre) crankshaft in excellent condition
•   two head gaskets suiting 86mm piston size, cambox gaskets, inlet manifold gasket, and two sump gaskets

•   all offers for each of pistons/rods/crankshaft groups,  or as a single group considered

Offline pneter

  • 695 cc
  • ***
  • Posts: 3
Re: For sale DIFF HEAD CRANK FIAT ABARTH 131 RALLY
« Reply #1 on: February 14, 2015, 09:15:21 PM »
Hello Trevor, Where to make an offer
Greetings
Peter

Offline trevor

  • 1800 cc
  • ******
  • Posts: 96
Re: For sale DIFF HEAD CRANK FIAT ABARTH 131 RALLY
« Reply #2 on: February 16, 2015, 12:32:10 AM »
Hello Peter,
Will private message you in a few minutes about offers.
Regards
Trevor

Offline trevor

  • 1800 cc
  • ******
  • Posts: 96
Re: For sale DIFF HEAD CRANK FIAT ABARTH 131 RALLY
« Reply #3 on: March 03, 2015, 07:38:38 PM »
Thank you to all for the interest shown.
All items have been SOLD.