Author Topic: do you now builder of AZTECH head for Fiat  (Read 7430 times)

0 Members and 1 Guest are viewing this topic.

Offline guy moerenhout

  • Administrator
  • 3000 cc
  • *****
  • Posts: 4.492
    • www.abarth-gmr.be
do you now builder of AZTECH head for Fiat
« on: December 25, 2007, 10:48:40 pm »
I am looking for more info about the aztech cilinderhead our JO/EL Engineering
______abarth  gmr-team ______
___http://www.abarth-gmr.be ___

Offline viotti600

  • 2000 cc
  • *******
  • Posts: 298
Re: ASTECH head
« Reply #1 on: December 26, 2007, 01:44:24 am »
 The designer of the ASTECH head for the Fiat 850 engine was Dale Tholen, who passed away years ago. The heads have not been produced for quite some time, though there are still a few to be found floating around the market every now & then. Are you looking for any particular information about this head?

 JO/EL Engineering was run by John Edwards, who currently runs an R&D/machine shop in Costa Mesa, CA, USA, and still toys with Fiat engines from time to time. http://www.engine-machining.com

Cheers,
  -JS.
« Last Edit: December 26, 2007, 01:44:59 am by viotti600 »
Jeff Stich
Norco, CA, USA

Offline guy moerenhout

  • Administrator
  • 3000 cc
  • *****
  • Posts: 4.492
    • www.abarth-gmr.be
Re: do you now builder of AZTECH head for Fiat
« Reply #2 on: December 26, 2007, 08:30:23 am »
Hallo JS,some one told me that the mouldings for this head are for sale .So I was interested to buy it .I am always interested to buy also some heads
______abarth  gmr-team ______
___http://www.abarth-gmr.be ___

Offline kikolemus

  • 1800 cc
  • ******
  • Posts: 31
  • 500
Re: do you now builder of AZTECH head for Fiat
« Reply #3 on: February 21, 2008, 08:20:33 pm »
I bought one of these heads years ago from Jeff on ebay. It is a real beauty but I have yet to run it.

John Edwards is still working on and racing Fiats. He also is working on casting some parts again.

Check him out racing his Fiat 850 Berlina.
http://www.youtube.com/watch?v=BaBTUJZbA7s [nofollow]

Mike
« Last Edit: February 21, 2008, 08:27:43 pm by kikolemus »

Offline Pantdino

  • 2000 cc
  • *******
  • Posts: 316
  • 500
Re: do you now builder of AZTECH head for Fiat
« Reply #4 on: February 22, 2008, 12:02:44 am »
If you are looking for a high performance head Scuderia Topolino has PBS heads for USD $922. 

http://www.scuderiatopolino.com/English%20Parts%20Shop%20site.htm

Jim

Offline Paul vander Heyden

  • 2000 cc
  • *******
  • Posts: 179
    • Scuderia Topolino
Re: do you now builder of AZTECH head for Fiat
« Reply #5 on: April 20, 2008, 03:29:03 am »
Guy,

If I can help with cylinderheads, please let me know.  I am currently making several of the items formerly made by PBS.  This includes the 8P PBS head, the PBS Shorty Water Pump, PBS 2-piece oil pan and the PBS 3-piece wheel center.

I am working on a couple of other items as well, but it is too early for any announcement.

Best regards,
Paul Vanderheijden

Offline jbailie

  • 695 cc
  • ***
  • Posts: 2
Re: do you now builder of AZTECH head for Fiat
« Reply #6 on: May 12, 2008, 08:20:48 am »
I am looking for more info about the aztech cilinderhead our JO/EL Engineering
  I worked with Dale Tholen on the Astech program, i built the  Astech 850 Fiat and both the formula ford and super Vee engines, i also drove Dales cars,  from 1969 to 1974.. i would be happy to help in what ever way i can  .................   Jim Bailie                    ....jbailie@brumos .com....
« Last Edit: May 12, 2008, 08:23:19 am by jbailie »

Offline slim4936

  • 1800 cc
  • ******
  • Posts: 46
Re: do you now builder of AZTECH head for Fiat
« Reply #7 on: May 17, 2008, 08:35:15 am »
Hi Jim,
For those of us who aspire to build 'hot' engines, do you remember what sort of HP increase you were getting by using the Astech head over the standard?
Also, can anyone suggest which head is superior? The PBS or Astech?What are the advantages/disadvantages of both.

Cheers, Toby.

Offline jbailie

  • 695 cc
  • ***
  • Posts: 2
Re: do you now builder of AZTECH head for Fiat
« Reply #8 on: May 26, 2008, 09:12:33 pm »
Hi Jim,
For those of us who aspire to build 'hot' engines, do you remember what sort of HP increase you were getting by using the Astech head over the standard?
Also, can anyone suggest which head is superior? The PBS or Astech?What are the advantages/disadvantages of both.

Cheers, Toby.
             Hi Toby............ Sorry for the somewhat  slow response, but i don't check this forum very often, as far as i can see    the PBS & Astech push rod motors were close to the same output at 843 cc (which is what we had to run in SCCA DSR) 110 hp was a good motor,  both the PBS & the Abarth twin cams were  somewhat higher and the PBS single overhead cam motor was someplace in between.   With a  112A  bottom end to work with and  maybe 1100 cc displacement , more power can be had.  as far as advantages/disadvantages,  it depends on what you are going to do with the motor ,  just like any other motorsport project "speed cost money, how fast do you want to go" .........one big advantage of the push rods is simplicity, with the Astech, all the stock 850 parts fit the head, valves ,springs, rockers, the works !.......  if your intent is to race , and win,  and cost is not a main focus, then i belive the twin cams have a slight advantage!  but then as Tholen used to say "thats just my opnion"..........Jim                                                                                       jbailie@brumos.com


Offline guy moerenhout

  • Administrator
  • 3000 cc
  • *****
  • Posts: 4.492
    • www.abarth-gmr.be
Re: do you now builder of AZTECH head for Fiat
« Reply #10 on: August 25, 2011, 04:00:01 pm »
many thanks
______abarth  gmr-team ______
___http://www.abarth-gmr.be ___

 

Digital2